Stl file of the print plan

Post Reply
dadoblu_2000
Posts: 31
Joined: 06 Dec 2021, 04:32

Stl file of the print plan

Post by dadoblu_2000 »

I wanted to draw the print plane of my printers with solidworks but I find it difficult to understand how to build it or I don't understand how kisslicer receives the file and from which coordinate it positions the drawing, I tried to use the front work plane in solidworks but even if I invert the extrusion places the plane always above the print level, where am I going wrong? the arrow with the circle indicates the thickness of the stl model, basically the top of the stl model should be aligned with the second arrow the one on the right.
Attachments
bed_stl.png
bed_stl.png (160.14 KiB) Viewed 1444 times
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Stl file of the print plan

Post by pjr »

Hi.

I have attached a copy of the Prusa Mk2 heatbed. This may help you to come up with a model for your printer.

Peter
Attachments
Heatbed-MK42.zip
(50.33 KiB) Downloaded 189 times
dadoblu_2000
Posts: 31
Joined: 06 Dec 2021, 04:32

Re: Stl file of the print plan

Post by dadoblu_2000 »

Thanks Peter, I share the Ultimaker and Flsun sr Print Bed with the community, I hope it will be useful for those who use Kisslicer.

p.s. In the file relating to the bed of the Flsun printer, the X and Y coordinates for the centering of the Kisslicer plane are indicated
Attachments
BED_FLSUN_SR_X192Y130.zip
(419.49 KiB) Downloaded 183 times
Bed_FLSun_sr.png
Bed_FLSun_sr.png (91.04 KiB) Viewed 1420 times
dadoblu_2000
Posts: 31
Joined: 06 Dec 2021, 04:32

Re: Stl file of the print plan

Post by dadoblu_2000 »

Ultimaker
Attachments
Bed_Ultimaker.png
Bed_Ultimaker.png (129.03 KiB) Viewed 1417 times
BED_ULTIMAKER_2+.zip
(841.01 KiB) Downloaded 180 times
Post Reply