Page 1 of 1
Accuracy Settings
Posted: 23 Feb 2015, 15:31
by hittinbottom
I have a second gen cube and have kisslicer printing really well. The only problem I have is the accuracy overall. It seems to print objects a little smaller than they are designed. If I print the same file with the cube software they are about right on the money. Anybody have any ideas on what to change that might help? Thanks.
Re: Accuracy Settings
Posted: 02 Mar 2015, 09:12
by hittinbottom
Anyone?
Re: Accuracy Settings
Posted: 02 Mar 2015, 13:52
by Pgregory
To my knowledge, there is no scaling feature in KISSlicer.
You will have to scale your project in your designer before you export the STL file.
Re: Accuracy Settings
Posted: 02 Mar 2015, 14:51
by DDME-Marc
Hello,
Scaling in KISSlicer can be done at the STL model pane, by simply adjusting the height value in proportion to your requirements. In doing so your model will rescale (and is very visible when large changes are made), and changes are indicated in percentage above.
- scale.jpg (35.33 KiB) Viewed 3165 times
Cheers,
Marc
Re: Accuracy Settings
Posted: 02 Mar 2015, 18:21
by Mikk36
There's also a right-click menu there.