Page 1 of 19
KISSlicer 1.6 Beta Bug Reports
Posted: 28 Jun 2017, 12:28
by pjr
PLEASE PLACE ALL BUG REPORTS IN THIS THREAD
I will then summarise them for Jonathan
Thanks in advance
Peter
Not recognising where support is required - see
https://www.thingiverse.com/thing:635497/#files (
funBart)
https://www.thingiverse.com/download:3767633 "Segmentation fault" (Ubuntu 17.04 64x, 24Gb Ram - OK on Windows build) (
demonx)
MAC - on screen text gets corrupted occasionally
EDIT: The above items are those currently outstanding for V1.6. Removed items have either been addressed in software, documentation or moved to "Feature Requests".
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 01 Jul 2017, 17:17
by abuharsky
bed temp is always 80C
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 02:11
by pjr
abuharsky wrote:bed temp is always 80C
For me, bed temp is what I set it to. Do you have any more information? Screenshots?
Thanks
Peter
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 05:47
by abuharsky
pjr wrote:abuharsky wrote:bed temp is always 80C
For me, bed temp is what I set it to. Do you have any more information? Screenshots?
Thanks
Peter
So, settings ->
- Снимок экрана 2017-07-02 в 13.45.52.png (83.23 KiB) Viewed 6423 times
But in the Start GCode line
"140 S<BED>" -> "140 S80" always
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 05:56
by abuharsky
Next bug with seam and ooze
Look ->
https://www.youtube.com/watch?v=j1Emsc7iIko
after each loop extruder moves up and wait about 1 second. This happens only on heights Z > 20mm
Min Layer time is set to 3sec, and "Preload" calibrated (0.55us)
Download test model ->
https://drive.google.com/file/d/0B8dro0 ... sp=sharing
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 06:38
by pjr
abuharsky wrote:But in the Start GCode line
"140 S<BED>" -> "140 S80" always
So I test-sliced with similar parameters:
- Image1.jpg (96.39 KiB) Viewed 6422 times
My G-Code came out correctly:
Code: Select all
T2
M201 X1500 Y1500 E900 ; set default acceleration
M301 P23.14 I1.78 D75.12 ; set PD for extruder heater
M304 P56.09 I2.39 D328.54 ; set PID for bed heater
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M140 S100 ; Heat the bed
M104 S170
M190 S100 ; Heat the bed
M109 S170
So I don't quite know what is happening for you.
Can you please save the project file and upload that?
Peter
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 06:45
by pjr
abuharsky wrote:Next bug with seam and ooze
after each loop extruder moves up and wait about 1 second. This happens only on heights Z > 20mm
Min Layer time is set to 3sec, and "Preload" calibrated (0.55us)
That's a minimum layer time wait to allow cooling, but oozing is happening during the wait. Doesn't look as though the destring is happening.
Can you please zip up and upload the G-Code file?
Peter
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 07:37
by abuharsky
pjr wrote:abuharsky wrote:Next bug with seam and ooze
after each loop extruder moves up and wait about 1 second. This happens only on heights Z > 20mm
Min Layer time is set to 3sec, and "Preload" calibrated (0.55us)
That's a minimum layer time wait to allow cooling, but oozing is happening during the wait. Doesn't look as though the destring is happening.
Can you please zip up and upload the G-Code file?
Peter
I think this is the same problem in my two reports.
Im using mac versions, looks like settings not applied.
My settings via UI
Settings in the gcode
- Снимок экрана 2017-07-02 в 15.35.41.png (62.73 KiB) Viewed 6421 times
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 07:45
by abuharsky
[SOLVED]
I removed all settings and setup new. After slicing in the gcode - correct settings.
Re: KISSlicer 1.6 Beta Bug Reports
Posted: 02 Jul 2017, 08:15
by pjr
abuharsky wrote:[SOLVED]
I removed all settings and setup new. After slicing in the gcode - correct settings.
Great, thanks. I have this listed for Jonathan.