4C Red, Yellow, White (eyes) and Transparent (wings)
Purge: 30, 50, 50, 60; Slight bleed on the white - should have purged 60mm.
0.2mm layers with support (now removed)
14h 51m
Peter
SuperFly and some other prints...
-
pjr
- Posts: 704
- Joined: 05 May 2015, 10:27
- Location: Kamnik, Slovenia
SuperFly and some other prints...
https://www.thingiverse.com/thing:2564723 (200%)
4C Red, Yellow, White (eyes) and Transparent (wings)
Purge: 30, 50, 50, 60; Slight bleed on the white - should have purged 60mm.
0.2mm layers with support (now removed)
14h 51m
Peter
4C Red, Yellow, White (eyes) and Transparent (wings)
Purge: 30, 50, 50, 60; Slight bleed on the white - should have purged 60mm.
0.2mm layers with support (now removed)
14h 51m
Peter
-
lonesock
- Posts: 258
- Joined: 09 Nov 2014, 18:41
- Contact:
Re: SuperFly
Very nice! (I'm glad you mentioned the materials...for some reason from the pic I was thinking the eyes and wings used the same material and the color variation was due to the light.) 15 hours! Time sure flies...(sorry!)
Jonathan
Jonathan
-
pjr
- Posts: 704
- Joined: 05 May 2015, 10:27
- Location: Kamnik, Slovenia
Om Nom and a turtle
And thanks again to Roman for the models!
Peter
-
pjr
- Posts: 704
- Joined: 05 May 2015, 10:27
- Location: Kamnik, Slovenia
Racing frogs
Peter
-
pjr
- Posts: 704
- Joined: 05 May 2015, 10:27
- Location: Kamnik, Slovenia
Articulated Fish.
I was reminded of this print by another forum user. It had been a while (11 months) since I printed this as a 2C model and part of the PR MMU Beta test programme.
This model however was printed with variable layer heights, multiple models and sizes and 4C. Print time 11h 42m.
Peter
Peter
-
pjr
- Posts: 704
- Joined: 05 May 2015, 10:27
- Location: Kamnik, Slovenia
Useless Piggy Bank
Decided to try this print for my kids: https://www.thingiverse.com/thing:437576
It looked a little small, so I increased the size to 150%
Now all the money can fall out... 
Peter
It looked a little small, so I increased the size to 150%
Peter