Page 1 of 1
Prusa XL Beta
Posted: 17 Mar 2023, 06:27
by pjr
Please note: These prints were created using the new Prusa XL BETA printer. This is NOT production hardware or firmware.
All sliced with Kisslicer
Prusa profiles can be found in this section of the forum:
viewforum.php?f=31
#prusa #prusaXLbeta
- PXL_20221228_212844896.jpg (3.05 MiB) Viewed 8584 times
https://www.printables.com/model/272943 ... dral-italy
- PXL_20230107_184007290.jpg (3.05 MiB) Viewed 8584 times
https://www.printables.com/model/212023-roman-colosseum
- PXL_20230113_080810263.jpg (3.46 MiB) Viewed 8584 times
https://www.printables.com/model/218224-moon-city-20
Peter
Re: Prusa XL Beta
Posted: 17 Mar 2023, 06:30
by pjr
A selection of prints from Prusa XL Beta + Kisslicer
#prusa #prusaXLbeta
All PLA
- PXL_20221227_170045319.jpg (3.1 MiB) Viewed 8582 times
And the logo (ASA)
- PXL_20230204_084126410.jpg (2.22 MiB) Viewed 8582 times
Peter
Re: Prusa XL Beta
Posted: 17 Mar 2023, 06:31
by pjr
A transforming model from
https://www.toymakr3d.com/
#prusa #prusaXLbeta
- Image 2023-02-20 at 10.31.49 (1).jpeg (189.92 KiB) Viewed 8582 times
- Image 2023-02-20 at 10.31.49.jpeg (188.94 KiB) Viewed 8582 times
- Image 2023-02-20 at 10.31.49 (2).jpeg (222.57 KiB) Viewed 8582 times
Peter
Re: Prusa XL Beta
Posted: 17 Mar 2023, 06:32
by pjr
Another transforming model from
https://www.toymakr3d.com/
#prusa #prusaXLbeta
- Image 2023-02-20 at 22.44.57.jpeg (334.52 KiB) Viewed 8582 times
- Image 2023-02-20 at 22.42.17.jpeg (297.14 KiB) Viewed 8582 times
I forgot to take the photo after the large face mask had been added
Peter
Re: Prusa XL Beta
Posted: 17 Mar 2023, 06:37
by pjr
https://www.toymakr3d.com/
#prusa #prusaXLbeta
- PXL_20230221_091555859.jpg (2.31 MiB) Viewed 8578 times
Peter