Simple non-alternating infill

Simple non-alternating infill

Postby chrish_92 » 14 Jul 2019, 04:30

Hi everybody,

I've been using kisslicer for a while now and really like it - it has lots of cool features other slicers lack.

One thing that bothers me is that there is no non-alternating infill. Since every infill layer always has small gaps it needs to bridge, the infill is not always connected but instead creates a kind of "dotted" line and blobs which stick out above the current layer height, which obviously might lead to problems (part cooling fan duct getting stuck on blob etc.). These gaps also weaken the infill.
(Btw, I use a 0.8 mm nozzle which might be more prone to this problem.)

I know that the new V2 alpha has gyroid infill in its premium version. But around 80$ is just too much for one additional infill - I don't need multiple extruder support or any other Premium/Pro feature.
Can we just have a simple grid infill where each layer rests exactly on the layer below?
chrish_92
 
Posts: 1
Joined: 14 Jul 2019, 04:22

Return to Feature requests

Who is online

Users browsing this forum: No registered users and 0 guests