I'm first time user of Easyarts 3D printer and Don't know how to model design and something kids toy with KISSlicer Pro.
Also, I can't open user manual & 3D printer setting.
Another things; Octoprint installed; 1.2.6-dirty, can't install this Available: 1.2.11 (STABLE); Update faild!
"I try to update plugin manager & software update Available: 1.2.11 (stable).
Can't update fails as the update did not finish successfully. Please consult the log for details and the others too.
The error is a GCODE file and has the extension".gcode" or.gco" or that is an STL file with the extension ".stl".
Would you teach how to fix or something else.
Please help me to fix for print.
Let me know.
BoriSpider wrote:Is there going to be a section for the 'Wizards and how to use them' in the manual soon?
Or is someone going to do a 'walk-through' soon so us who are not as 'KISS-savey' can use/try them out.
There's more wizards to come... So there will probably be more write-ups soon.
My next tutorial video is about the tuning wizards. It takes a while to create these and this one requires video of the printer and photos of printed tuning parts which add to the time and complexity. But it is coming along. Subscribe to my YouTube channel to get advance notice!
Tnx Michael. I got to a point that I had to delete all profiles and start all over just so I could print something. I do confess that the PLA filament I am using is a little old and from the looks of it the yellow works best, the worst color I have according to my wife. I sub'ed you on YouTube already and I still have the "Settings" video to watch. That should keep me til your new one shows up.