Too many loops plus crown in a narrow wall

Locked
Beefeater
Posts: 34
Joined: 17 Jul 2017, 22:54

Too many loops plus crown in a narrow wall

Post by Beefeater »

Overextrusion.jpg
Overextrusion.jpg (57.09 KiB) Viewed 1159 times
I did not make a separate example, but we can see the problem in the attached model near X1.407 Y29.416 Z4.767. Part of the cross-section is too narrow for two loops, but KS makes two loops anyway, which is already an over-extrusion.Then on top of that, it puts a crown bead there, too. Altogether, the wall gets about twice the amount of material it should. Happens in both KS 1.6.3 and 2.0.4.4.
Attachments
Overextrusion.zip
(456.26 KiB) Downloaded 91 times
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Too many loops plus crown in a narrow wall

Post by pjr »

I have reported a crown path problem with multiple filaments which is being worked on.

This is now also reported.

Thanks

Peter
Locked