Note STL files used in GCODE comment

[jsryork]

Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John

[pjr]

Added to the V2 "Feature Request List"

Peter

[whaling]

Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John

I second this, and would also find a record of the transformations applied to the model (eg scaling) really useful.

[ruffle]

Thirded

It would also be useful if it stored the full filepathname and could automatically try to load it again.