Note STL files used in GCODE comment

Note STL files used in GCODE comment

Postby jsryork » 11 Jul 2018, 04:03

Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John
jsryork
 
Posts: 6
Joined: 12 Nov 2016, 16:01

Re: Note STL files used in GCODE comment

Postby pjr » 11 Jul 2018, 06:05

Added to the V2 "Feature Request List"

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 546
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Note STL files used in GCODE comment

Postby whaling » 12 Feb 2019, 14:15

jsryork wrote:Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John


I second this, and would also find a record of the transformations applied to the model (eg scaling) really useful.
whaling
 
Posts: 5
Joined: 28 Dec 2018, 15:28

Re: Note STL files used in GCODE comment

Postby ruffle » 17 May 2019, 02:23

Thirded :)

It would also be useful if it stored the full filepathname and could automatically try to load it again.
ruffle
 
Posts: 10
Joined: 29 May 2018, 03:40


Return to Feature requests

Who is online

Users browsing this forum: No registered users and 1 guest