Incomplete Top layer with provided settings
Posted: 30 Nov 2017, 16:45
Hi guys,
I have another issue and hope somebody has another idea how to solve this elegantly:
When using the "(075) Superfine" Style of the provided Prusa i3 MK2 profiles I have massive problems with the top layer: the small one on the lower right is printed with 0.2mm layer height, there the problem does not arise.
I have already played around with more infill(20%) which is not an option in my opinion. Increasing the skin thickness to 0.6 and reducing the speed helped a little but I did not succeed completely. THe only thing changed to the preconfigured settings is of cource the material stuff (btw already tried to print with 205°C but didn't help) and increased the speed values to the ones pjr uses according to a response I got in the Prusa forum.
I am still testing different settings, but maybe somebody can point me in the right direction.
Thanks again for all your help!
Regards
Manu
I have another issue and hope somebody has another idea how to solve this elegantly:
When using the "(075) Superfine" Style of the provided Prusa i3 MK2 profiles I have massive problems with the top layer: the small one on the lower right is printed with 0.2mm layer height, there the problem does not arise.
I have already played around with more infill(20%) which is not an option in my opinion. Increasing the skin thickness to 0.6 and reducing the speed helped a little but I did not succeed completely. THe only thing changed to the preconfigured settings is of cource the material stuff (btw already tried to print with 205°C but didn't help) and increased the speed values to the ones pjr uses according to a response I got in the Prusa forum.
I am still testing different settings, but maybe somebody can point me in the right direction.
Thanks again for all your help!
Regards
Manu