Page 1 of 1
Skirt around all parts?
Posted: 17 Nov 2017, 11:22
by RichWP
Hello,
Is there a way to force the skirt to outline all parts (not just each individual) in multi-part prints?
I generally use the skirt to quickly determine if I have any leveling issues before I get too far into a print; also, printing a skirt for part 'B' after laying down the skirt and first layer of part 'A' seems unnecessary.
Very new to Kiss (awesome slicer BTW), so hopefully I'm not missing something obvious.
Thanks!
Rich.
Re: Skirt around all parts?
Posted: 17 Nov 2017, 14:17
by hacker
I don't think there's a way, but I agree and would love to see that on 2.0 wishlist.
Re: Skirt around all parts?
Posted: 23 Nov 2017, 16:33
by Bubolz
+1
Re: Skirt around all parts?
Posted: 03 Dec 2017, 01:02
by woody3dp
+1
Re: Skirt around all parts?
Posted: 14 Dec 2017, 14:29
by DeltaCon
+1
One of the KISS quirks that make no sense
Probably the result of "skirt" being interpreted as a "brim with a distance".
Re: Skirt around all parts?
Posted: 14 Dec 2017, 16:52
by localgost
+1
Re: Skirt around all parts?
Posted: 03 Jan 2018, 15:50
by Jani
+1
Re: Skirt around all parts?
Posted: 20 Mar 2018, 14:38
by pjr
DeltaCon wrote:Probably the result of "skirt" being interpreted as a "brim with a distance".
No, previous versions with the "skirt" option did exactly the same.
Personally, I never use "skirt"; I just print a priming line at the front of the bed before every print:
Code: Select all
G1 Y-3 Z0.250 F7200.000
G1 X50.0 E75.0 F1000.0
G1 X160.0 E10.0 F1000.0
G1 X220.0 E6 F1000.0
G1 X240.0 E2 F1000.0
G1 Y-1
G1 X40 E15 F1000
G1 X0 E2 F1000.0
G1 E-<DESTRING> F4800
The above is for the Original Prusa i3 Mk2/S + MMU, where the loading is somewhat inconsistent and requires rather a long priming line...
Peter
Re: Skirt around all parts?
Posted: 20 Mar 2018, 15:44
by wesc
Even worse, it prints the skirt on top of any supports which are printed first. (this may be an interaction of skirts of a given height and variable layer height).