Page 1 of 1
SuperFly and some other prints...
Posted: 27 Oct 2017, 03:04
by pjr
https://www.thingiverse.com/thing:2564723 (200%)
4C Red, Yellow, White (eyes) and Transparent (wings)
Purge: 30, 50, 50, 60; Slight bleed on the white - should have purged 60mm.
0.2mm layers with support (now removed)
14h 51m
Peter
Re: SuperFly
Posted: 27 Oct 2017, 12:10
by lonesock
Very nice! (I'm glad you mentioned the materials...for some reason from the pic I was thinking the eyes and wings used the same material and the color variation was due to the light.) 15 hours! Time sure flies...(sorry!)
Jonathan
Re: SuperFly
Posted: 30 Oct 2017, 21:24
by inventabuild
Nice!
Om Nom and a turtle
Posted: 31 Oct 2017, 10:16
by pjr
Variable layer height, both printed together ("Joint") and a little more purging on the lighter colours.
And thanks again to Roman for the models!
Peter
Racing frogs
Posted: 31 Oct 2017, 11:13
by pjr
0.2mm layers, 5h 13m
Peter
Articulated Fish.
Posted: 07 Nov 2017, 06:40
by pjr
I was reminded of this print by another forum user. It had been a while (11 months) since I printed this as a 2C model and part of the PR MMU Beta test programme.
This model however was printed with variable layer heights, multiple models and sizes and 4C. Print time 11h 42m.
Peter
Useless Piggy Bank
Posted: 09 Nov 2017, 08:11
by pjr
Decided to try this print for my kids:
https://www.thingiverse.com/thing:437576
It looked a little small, so I increased the size to 150%
Now all the money can fall out...
Peter