Hi,
Corner path are somethime very strange. it also seems to depend on the extrusion thickness. With 0.3 extrusion width is pretty bad.
This seems to happen with several kisslicer free version and the 1.5 release
is it my fault?
Config files and STL attached
Strange corner path
-
Ultim - Yoann
- Posts: 25
- Joined: 16 Sep 2014, 02:31
Strange corner path
- Attachments
-
- Cube.zip
- (713 Bytes) Downloaded 349 times
-
- KISSlicer_Win64_1.5_Release_config_files.zip
- (2.3 KiB) Downloaded 348 times
-
-
frozen.rabbit
- Posts: 133
- Joined: 17 Nov 2014, 09:20
Re: Strange corner path
I'm seeing clipped corners in 1.5 release, and a bit of non linear path at corners in 1.2.0.1 release. Oversample resolution doesn't have much effect. This can't be good for level of detail. 0.2mm extrusion width.
- 1.5.jpg (29.6 KiB) Viewed 5987 times
- 1.2.0.1.jpg (19.43 KiB) Viewed 5987 times