First Layer Height setting
Posted: 29 May 2016, 11:08
I use the Prusa I3 "original" (waiting for the Mk2 to arrive...) which has a minimum first layer height of 0.23mm.
It would be very nice to have a Printer setting for this, so that I don't have to remember to change the bed roughness setting every time I select a different layer height.
This would also assist all the "original" owners out there looking for a really great slicer!
Many thanks in advance.
Peter
P.S. Jonathan - I understand that Josef has been in touch a couple of months ago. Did you make any decision yet?
P.P.S - And thanks for all the updates recently!
It would be very nice to have a Printer setting for this, so that I don't have to remember to change the bed roughness setting every time I select a different layer height.
This would also assist all the "original" owners out there looking for a really great slicer!
Many thanks in advance.
Peter
P.S. Jonathan - I understand that Josef has been in touch a couple of months ago. Did you make any decision yet?
P.P.S - And thanks for all the updates recently!