KISSlicer V2.0 Alpha Fault Reports

Post Reply
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: KISSlicer V2.0 Alpha Fault Reports

Post by pjr »

orcinus wrote:The model is perfectly flat.
If you want to upload the model, I can get it checked out.

Peter
User avatar
Alexander Mundy
Posts: 13
Joined: 11 Jul 2018, 18:47

Large Nozzle Extrusion Problems

Post by Alexander Mundy »

Is this on the list to check? Has anyone else experienced this with large nozzles and layer heights?

I have built a new printer which is dedicated to larger objects with E3D Volcano and large nozzles. Using a 1mm nozzle with PETG @ 1.2mm extrusion width and 0.6 to 0.8 layer heights I am finding that solid infill is over extruded 5 to 10%. If I adjust for the solid infill to be correct the loops and perimeters are under extruded. I have made sure it is not a speed related problem by setting all loop, solid, etc speeds the same. Also have tried with and without Duet non linear extrusion applied. I did not notice this with my other printer with 0.4 or 0.6 nozzles with the same filament, however now that I check upon examination with magnifying glasses it does appear I am setting extrusion multiplier with the smaller nozzle machine to a balance where one is a hair over and the other a hair under extruded. With the larger nozzle it is a problem due to the large amounts of plastic it is extruding and I can't find a balance where after several solid layers it doesn't start building up but yet perimeters and loops are acceptable.

Using Premium 0.9.9 Win 32 May 10th 2019
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Large Nozzle Extrusion Problems

Post by pjr »

Alexander Mundy wrote:Is this on the list to check? Has anyone else experienced this with large nozzles and layer heights?

...
Any chance you could upload the G-code for me to have a look please?

Thanks

Peter
User avatar
Alexander Mundy
Posts: 13
Joined: 11 Jul 2018, 18:47

Re: KISSlicer V2.0 Alpha Fault Reports

Post by Alexander Mundy »

Here is one.

(funny that extension gcode isn't allowed)
Attachments
Breather Box.zip
(408.46 KiB) Downloaded 71 times
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: KISSlicer V2.0 Alpha Fault Reports

Post by pjr »

Alexander Mundy wrote:Here is one.

(funny that extension gcode isn't allowed)
Thanks, I will have a look.

Only Image and Zip files are allowed, which is the same as other forums I use.

Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: KISSlicer V2.0 Alpha Fault Reports

Post by pjr »

Alexander Mundy wrote:Here is one.
Well, I spent a little while examining the solid paths on the first layer.

For whatever reason, the first layer is being printed at Z=0.558 and the extrusion width for one path is 1.0146mm. But you do have flow tweak set to 0.9, and therefore a flow tweak value of 1 should produce an extrusion of 1.127mm - still not the "expected" 1.2mm.

However, you have X and Y shrink values of 1% and I wonder if this is throwing the figures?

It doesn't look right. Can I please ask you to re-slice the model with flow tweak set to 1 and the shrink values set to 0 and upload the result?

Thanks.

Peter
User avatar
Alexander Mundy
Posts: 13
Joined: 11 Jul 2018, 18:47

Re: KISSlicer V2.0 Alpha Fault Reports

Post by Alexander Mundy »

Loaded the last project for that file, but not sure some settings wern't changed so here is 4 files. 1 with 0.9 flow & 1 XY shrink, 1 with 1 flow & 1 XY shrink, 1 with 1 flow & 0 XY shrink, 1 with 0.9 flow & 0 XY shrink just to cover the bases.
Attachments
Breather Box Flow 0p9 XY 1.7z
(304.86 KiB) Downloaded 63 times
Breather Box Flow 0p9 XY 0.7z
(304.81 KiB) Downloaded 61 times
Breather Box Flow 1 XY 1.7z
(305.93 KiB) Downloaded 65 times
Breather Box Flow 1 XY 0.7z
(306.11 KiB) Downloaded 62 times
frozen.rabbit
Posts: 132
Joined: 17 Nov 2014, 09:20

Re: KISSlicer V2.0 Alpha Fault Reports

Post by frozen.rabbit »

still seeing crossing of internal perimeters with Stay Inside and Avoid Edges
Attachments
cap.jpg
cap.jpg (139.73 KiB) Viewed 1531 times
User avatar
orcinus
Posts: 15
Joined: 30 Dec 2014, 20:59
Location: Croatia

Re: KISSlicer V2.0 Alpha Fault Reports

Post by orcinus »

pjr wrote:
orcinus wrote:The model is perfectly flat.
If you want to upload the model, I can get it checked out.

Peter
Checked out for what?
Will you fix the issue if you "check it out"?

https://www.dropbox.com/s/2aeetfkmxjd8d ... y.stl?dl=0
setar
Posts: 3
Joined: 11 Sep 2017, 12:50

Re: KISSlicer V2.0 Alpha Fault Reports

Post by setar »

alpha_2.0.6

Problem with generated language .pot file : not open by poedit.

manual fix (drop first and last line, convert to unix LF) :
tail -n+2 ./KISSlicer_language.pot |tail -r | tail -n +1 | tail -r | dos2unix >2.po

and additional manual edit with replace 0x0BA and 0x0C2 (not all)

P.S. alpha 1.6.3 - not have the bug
Attachments
2.po.zip
(21.82 KiB) Downloaded 49 times
Post Reply