Note STL files used in GCODE comment

Post Reply
jsryork
Posts: 6
Joined: 12 Nov 2016, 16:01

Note STL files used in GCODE comment

Post by jsryork »

Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Note STL files used in GCODE comment

Post by pjr »

Added to the V2 "Feature Request List"

Peter
whaling
Posts: 5
Joined: 28 Dec 2018, 15:28

Re: Note STL files used in GCODE comment

Post by whaling »

jsryork wrote:Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John
I second this, and would also find a record of the transformations applied to the model (eg scaling) really useful.
ruffle
Posts: 12
Joined: 29 May 2018, 03:40

Re: Note STL files used in GCODE comment

Post by ruffle »

Thirded :)

It would also be useful if it stored the full filepathname and could automatically try to load it again.
Post Reply