Accelerations settings

Post Reply
rantzaus
Posts: 105
Joined: 14 Dec 2015, 04:14

Accelerations settings

Post by rantzaus »

Hi fellow CubeX printers

Is there at way to adjust the acceleration of the movements on the CubeX?
When printing infill, the whole machine is shaking, since the acceleration is high and displacement small.

Any Ideas?
Giovanni V.
Posts: 241
Joined: 18 Nov 2014, 09:34

Re: Accelerations settings

Post by Giovanni V. »

Hi, with Cubex firmware you cant directly control the acceleration, but if you reduce the Max Speed into CubeItMod, the acceleration will be reduced.
Post Reply