Hi, everybody!
Well, I was aiming for a Release Candidate, but I'm not quite there yet, so I just updated the most recent build in the first post: 1.6 Beta 3.10
I *hope* this is it for features. I'm going to work on some bugs, updating some text, and making sure everything can be translated. At that point I will put a Release Candidate here on the forums, then switch to working on the website and documentation. Here is the changelog:
Code: Select all
2017-08-01 - v1.6 Beta 3.10
* Printer wizard
- added 'G4 P0' before extruder warming / cooling
- added retract for BfB cool
- commented out the preheat by default
2017-07-31 - v1.6 Beta 3.9
* Added a flow rate range to the info label when adaptive layers are enabled
* added a bunch of safeties to sqrt function calls
* when preload is disabled, KISSlicer will now blend velocities in and out of unsupported sections (had been sudden)
* Added a "Joint Layers" option to force all models to use the same adaptive layers
(for multi-extruder-single-nozzle prints, to minimize the purge block volume)
* started on analyzing just how unsupported a path might be
* Fixed layer thickness reporting in G-code
* added a "Prepare" comment 10 mm before end of paths that may want to slow down
2017-07-26b - v1.6 Beta 3.7
* Higher Z gap on dwell.
* Draft style profile from wizard defaults to 10% cellular infill.
* Removed 'Skirt' from the label of the Prime mode selector.
* Fixed tab order on Brim / Skirt Gap.
* Allow 0 for inflate support.
2017-07-26 - 1.6 Beta 3.6
* new Profile Wizards
* added an option for printers who treat G4 Pxxx as seconds, instead of milliseconds
* added layer thickness in G-code comments
* improved print time estimates, and the feature to slow to meet min layer time
* fixed profile corruption (came with the tracked Most Recently Used profiles per Printer)
2017-07-17 - 1.6 Beta 3.2
* you can associate Style, Support, and Material profiles with specific Printer profiles
2017-07-17 - 1.6 Beta 3.1
* hybrid Brim / Skirt
* tracks Most Recently Used style / support / material profiles per Printer Profile
thanks,
Jonathan