Hi, everybody!
I will keep this thread up to date with info about the latest build for 1.5 Beta 1 (until we get a Beta 2, which will have its own thread).
Note that I can NOT attach the actual executable files, as the forum size limit is too small, so, here is the link to a dropbox folder where I will keep the latest version:
KISSlicer Builds
In there you will find 1.5 Beta 1.17 for Windows, mostly fixing some bugs from the previous build like no wipe on the prime skirt / wall, and a wrong extruder cool-down temp. I also reduced the RAM requirements a tiny bit.
Mac and Linux builds will be coming soon.
thanks,
Jonathan
KISSlicer 1.5 Beta 1 - in development
- lonesock
- Posts: 258
- Joined: 09 Nov 2014, 18:41
- Contact:
- lonesock
- Posts: 258
- Joined: 09 Nov 2014, 18:41
- Contact:
Re: KISSlicer 1.5 Beta 1 - in development
Linux builds are up. I will try to compile for Mac very late tonight.
Jonathan
Jonathan
- plexus
- Site Admin
- Posts: 114
- Joined: 02 Sep 2014, 21:39
Re: KISSlicer 1.5 Beta 1 - in development
I will increase the size limit so you can post files. i will do that now....
ok try attaching one to a post
ok try attaching one to a post
- lonesock
- Posts: 258
- Joined: 09 Nov 2014, 18:41
- Contact:
Re: KISSlicer 1.5 Beta 1 - in development
The Mac build is up!
I will try attaching them all directly to my post, probably tomorrow. Thanks, Plexus!
Jonathan
I will try attaching them all directly to my post, probably tomorrow. Thanks, Plexus!
Jonathan
- Msquare
- Posts: 20
- Joined: 18 Dec 2014, 12:58
- Location: Copenhagen
Re: KISSlicer 1.5 Beta 1 - in development
It's Christmas !?! - I see a beta 1.5-2.0 -in the Dropbox refered to above. Only 18 hours old. Can't waitto come home and try it.
- funBart
- Posts: 49
- Joined: 07 Nov 2014, 11:40
- Location: Rotterdam, the Netherlands
- Contact:
Re: KISSlicer 1.5 Beta 1 - in development
Hello Msquare,
yes Jonathan uploaded it. I received the following mail from him about that:
I am working on it right now, trying to get the full GUI translatable!
It has been a pain, some mistakes in my code of course, and some
limitations of the FLTK library. So this is taking way longer than I
wanted, but it is necessary for the next release! Let me put a build
in the dropbox folder for you to play with!
There is a tiny bit more work I want to do before I announce it, but
it's almost done.
As far I can see, no features added, but I haven't tried that version to its limits. Please do!
I know some (Davide...) are into translation, so please try that, as that's what is troubling Jonathan.
Any feedback is welcome!
Bart
yes Jonathan uploaded it. I received the following mail from him about that:
I am working on it right now, trying to get the full GUI translatable!
It has been a pain, some mistakes in my code of course, and some
limitations of the FLTK library. So this is taking way longer than I
wanted, but it is necessary for the next release! Let me put a build
in the dropbox folder for you to play with!
There is a tiny bit more work I want to do before I announce it, but
it's almost done.
As far I can see, no features added, but I haven't tried that version to its limits. Please do!
I know some (Davide...) are into translation, so please try that, as that's what is troubling Jonathan.
Any feedback is welcome!
Bart
Bart ter Haar
CraftBot PLUS support: https://www.CraftBot.nl
CraftBot PLUS support: https://www.CraftBot.nl
- Davide Ardizzoia
- Posts: 122
- Joined: 07 Nov 2014, 13:05
- Location: Oleggio, Italy
- Contact:
Re: KISSlicer 1.5 Beta 1 - in development
Hello all,
I am working on several things concerning new beta:
-Localization (Italian is done, French is coming)
-New revised manual, with step by step calibration (english will be first, then italian, then French)
I am thinking to release manual on some minimal kind of pay/donation... maybe manual on donationware and ask a minimal fee for the "multiextruder tips & tricks".
Some more interesting things are boiling...
Stay tuned!
Best Regards
Davide Ardizzoia
I am working on several things concerning new beta:
-Localization (Italian is done, French is coming)
-New revised manual, with step by step calibration (english will be first, then italian, then French)
I am thinking to release manual on some minimal kind of pay/donation... maybe manual on donationware and ask a minimal fee for the "multiextruder tips & tricks".
Some more interesting things are boiling...
Stay tuned!
Best Regards
Davide Ardizzoia
- PenskeGuy
- Posts: 98
- Joined: 08 Nov 2014, 18:04
Re: KISSlicer 1.5 Beta 1 - in development
Maybe I should do the same thing with my Thin Wall and Solid Cube Calibration step-by-step Instructions PDF....Davide Ardizzoia wrote:I am thinking to release manual on some minimal kind of pay/donation... maybe manual on donationware and ask a minimal fee for the "multiextruder tips & tricks".
- Davide Ardizzoia
- Posts: 122
- Joined: 07 Nov 2014, 13:05
- Location: Oleggio, Italy
- Contact:
Re: KISSlicer 1.5 Beta 1 - in development
---------------
(wrong & outdated question)
Brgds
(wrong & outdated question)
Brgds
Last edited by Davide Ardizzoia on 27 Dec 2014, 09:32, edited 1 time in total.
- funBart
- Posts: 49
- Joined: 07 Nov 2014, 11:40
- Location: Rotterdam, the Netherlands
- Contact:
Re: KISSlicer 1.5 Beta 1 - in development
Davide, that's not an available beta-version yet in the dropbox Jonathan uses for this forum.
How much would that cost Davide/Penskeguy for your additional manuals?
Bart
How much would that cost Davide/Penskeguy for your additional manuals?
Bart
Bart ter Haar
CraftBot PLUS support: https://www.CraftBot.nl
CraftBot PLUS support: https://www.CraftBot.nl