Ultim - Yoann
Posts: 25 Joined: 16 Sep 2014, 02:31
Post
by Ultim - Yoann » 21 Nov 2014, 05:20
M-CODE commandes for Cubex Firmware (1.07) :
M542 - - - - - - - - - - - - - - - -> Go to the location of the purge
M543 - - - - - - - - - - - - - - - -> Return from the location of the purge
M551 P[length] S[speed] - - > Purge
M227 P[length] S[speed] - - > "Prime/Suck" function
M228 P[length] S[speed] - - > "Prime/Suck" function
M101 - - - - - - - - - - - - - - - -> Start extrusion
M103 - - - - - - - - - - - - - - - -> Stop extrusion
M104 S[C°] - - - - - - - - - - - -> Nozzle temperature
M106 - - - - - - - - - - - - - - - -> Start fan
M107 - - - - - - - - - - - - - - - -> Stop fan
M108 p[rpm*10] - - - - - - - - -> Speed extrusion (integer)
G-CODE commandes for Cubex Firmware (1.07) :
G1 X[coordinates] Y[coordinates] Z[coordinates] F[velocity] - - -> coordinates of displacement and velocity of the nozzle
G4 P[Sec] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -> Pause in seconds
jaydie
Posts: 25 Joined: 24 Mar 2016, 15:24
Post
by jaydie » 04 Apr 2016, 17:40
M551 P[length] S[speed] - - >Purge
I would like to play around with some of the gcodes butI not sure if my assumptions are correct, P[length] is in mm and S[speed} is in mm/sec. Please correct me if I'm wrong.