Hi guys,
First my appreciation for Kisslicer, I produce SLA printers and my customers they use it with satisfation.
I'm working on new SLA with 2 lasers, one for infill and one for perimeters.
I noticed that mapping works only for supports,
is possible to have it also for infill ?
Regards
Meow
btw you can see prints and printer here http://www.bluecat.it
Infill extruder mapping
-
- Posts: 33
- Joined: 28 Jan 2015, 22:24
Re: Infill extruder mapping
Ext Map -> Default Extruder Mapping. Last dropdown.
If you don't have that, get the newest KISSlicer. You can find it in the forum index.
If you don't have that, get the newest KISSlicer. You can find it in the forum index.
- Davide Ardizzoia
- Posts: 122
- Joined: 07 Nov 2014, 13:05
- Location: Oleggio, Italy
- Contact:
Re: Infill extruder mapping
You currently can't set an extruder for infill and another for perimenters.
AFAIK this feature is not supported yet in the next beta (due soon).
Best Regards
Davide Ardizzoia
AFAIK this feature is not supported yet in the next beta (due soon).
Best Regards
Davide Ardizzoia