See attachment.
Anyone know what I am missing?
I have tried a few different files and the same thing.
Please help
Failed, Returning 1
-
tesseracttech
- Posts: 1
- Joined: 24 Apr 2015, 11:15
Failed, Returning 1
- Attachments
-
- Capture.PNG (3.43 KiB) Viewed 2641 times
-
jonny.m
- Posts: 45
- Joined: 09 Mar 2015, 14:44
Re: Failed, Returning 1
Hi Tesseracttech,
the file you have specified in Kisslicers Printer Firmware Tab needs to be located in the same folder as Kisslicer itself. Make sure the name is correct, in your case you have specified cubeitmod.exe, so there needs to be the cubeitmod.exe in the Kisslicer directory.
Regards,
Tobi
the file you have specified in Kisslicers Printer Firmware Tab needs to be located in the same folder as Kisslicer itself. Make sure the name is correct, in your case you have specified cubeitmod.exe, so there needs to be the cubeitmod.exe in the Kisslicer directory.
Regards,
Tobi
-
Hugues
- Posts: 126
- Joined: 11 Nov 2014, 03:40
- Contact:
Re: Failed, Returning 1
Hi,
The error come from the post proscessor line in printer/firmware tab.
Please read tutorial on my website to check your setup.
Also the good couple between cubeitmod and the last kisslicer can be found on this thread :
viewtopic.php?f=20&t=442&start=40
There is more option on this version but it can work well with the standard options.
The error come from the post proscessor line in printer/firmware tab.
Please read tutorial on my website to check your setup.
Also the good couple between cubeitmod and the last kisslicer can be found on this thread :
viewtopic.php?f=20&t=442&start=40
There is more option on this version but it can work well with the standard options.