Prusa XL Beta

Post Reply
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Prusa XL Beta

Post by pjr »

Please note: These prints were created using the new Prusa XL BETA printer. This is NOT production hardware or firmware.

All sliced with Kisslicer :)

Prusa profiles can be found in this section of the forum: viewforum.php?f=31

#prusa #prusaXLbeta
PXL_20221228_212844896.jpg
PXL_20221228_212844896.jpg (3.05 MiB) Viewed 2248 times
https://www.printables.com/model/272943 ... dral-italy
PXL_20230107_184007290.jpg
PXL_20230107_184007290.jpg (3.05 MiB) Viewed 2248 times
https://www.printables.com/model/212023-roman-colosseum
PXL_20230113_080810263.jpg
PXL_20230113_080810263.jpg (3.46 MiB) Viewed 2248 times
https://www.printables.com/model/218224-moon-city-20

Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Prusa XL Beta

Post by pjr »

A selection of prints from Prusa XL Beta + Kisslicer

#prusa #prusaXLbeta

All PLA
PXL_20221227_170045319.jpg
PXL_20221227_170045319.jpg (3.1 MiB) Viewed 2246 times
And the logo (ASA)
PXL_20230204_084126410.jpg
PXL_20230204_084126410.jpg (2.22 MiB) Viewed 2246 times
Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Prusa XL Beta

Post by pjr »

A transforming model from https://www.toymakr3d.com/

#prusa #prusaXLbeta
Image 2023-02-20 at 10.31.49 (1).jpeg
Image 2023-02-20 at 10.31.49 (1).jpeg (189.92 KiB) Viewed 2246 times
Image 2023-02-20 at 10.31.49.jpeg
Image 2023-02-20 at 10.31.49.jpeg (188.94 KiB) Viewed 2246 times
Image 2023-02-20 at 10.31.49 (2).jpeg
Image 2023-02-20 at 10.31.49 (2).jpeg (222.57 KiB) Viewed 2246 times
Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Prusa XL Beta

Post by pjr »

Another transforming model from https://www.toymakr3d.com/

#prusa #prusaXLbeta
Image 2023-02-20 at 22.44.57.jpeg
Image 2023-02-20 at 22.44.57.jpeg (334.52 KiB) Viewed 2246 times
Image 2023-02-20 at 22.42.17.jpeg
Image 2023-02-20 at 22.42.17.jpeg (297.14 KiB) Viewed 2246 times
I forgot to take the photo after the large face mask had been added :(

Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Prusa XL Beta

Post by pjr »

https://www.toymakr3d.com/

#prusa #prusaXLbeta
PXL_20230221_091555859.jpg
PXL_20230221_091555859.jpg (2.31 MiB) Viewed 2242 times
Peter
Post Reply