Page 1 of 1

Ender 3 need profile

Posted: 01 Feb 2019, 10:55
by Cthutq
Very popular printer Ender 3. I suggest to share the settings and printing problems of this printer. I would be grateful if the settings for this printer appear.

Re: Ender 3 need profile

Posted: 06 Feb 2019, 08:52
by harrygeier
It should be easy to create with the add printer wizard.

Just finally add some GCode tweaks as you would in any other slicer. they depend on your setup ( Bed Leveling, addons stuff etc ) and could nbot be shared anyway.

I have a profile for an A8 with Bed Levelling and a priming sequence at a extreme left/front Position . I remember i ran that one on some guys Tevo flash with no issues.
so if you like to try, i can share

Re: Ender 3 need profile

Posted: 07 Feb 2019, 10:52
by ismaelzsilva
Cthutq wrote:Very popular printer Ender 3. I suggest to share the settings and printing problems of this printer. I would be grateful if the settings for this printer appear.
Hi! I started using Kisslicer yesterday, reading a lot of documents and actually had a good results. I am in classroom right now and just buildup a new profile. There is the print-screens of what i changed. Just be sure you shutdown your printer before printing with a new gcode file. It seems that the internal memory doenst change after printing once.

https://imgur.com/a/9ht7ABx

Have a nice day!

Re: Ender 3 need profile

Posted: 07 Feb 2019, 10:58
by Cthutq
harrygeier, ismaelzsilva Thank you very much, I did the tests myself yesterday and I liked the results. And I downloaded all the screenshots of the settings for my experiments.

Re: Ender 3 need profile

Posted: 08 Feb 2019, 03:30
by ismaelzsilva
Cthutq wrote:harrygeier, ismaelzsilva Thank you very much, I did the tests myself yesterday and I liked the results. And I downloaded all the screenshots of the settings for my experiments.
Nice to know you will try it. I have a lot of problems with my bowden extruder so i printed a mod to transform the extruder in a direct one. In a direct extruder the retraction will be smaller than in a bowden type. When i finish polishing it i will upload some updated settings.

Have a nice weekend!

Re: Ender 3 need profile

Posted: 25 Apr 2019, 12:08
by Virag
Hi, I couldn`t find or create settings for my Anet A8. I`d like to try Kisslicer but prints wont start,cand you help me with the settings please? Thank you!

Re: Ender 3 need profile

Posted: 25 Apr 2019, 13:04
by pjr
Virag wrote:Hi, I couldn`t find or create settings for my Anet A8. I`d like to try Kisslicer but prints wont start,cand you help me with the settings please? Thank you!
If you can upload some G-code (zipped) which will work, it should be quite simple to get KISS working.

Peter

Re: Ender 3 need profile

Posted: 08 Jun 2019, 03:04
by marcus
Hello :-)

Does anyone here find a good profile/settings for the Ender-3? I have mixed results.

Thank you!

-Marcus

Re: Ender 3 need profile

Posted: 23 Jul 2019, 21:06
by lajos
I have an Ender 5. I posted the profile I made for it on github: https://github.com/lajos/Creality-Ender ... er-Profile

The Ender 3 seems similar, so it might also work.