Ender 3 need profile

Ender 3 need profile

Postby Cthutq » 01 Feb 2019, 10:55

Very popular printer Ender 3. I suggest to share the settings and printing problems of this printer. I would be grateful if the settings for this printer appear.
Cthutq
 
Posts: 28
Joined: 12 Jul 2018, 13:45

Re: Ender 3 need profile

Postby harrygeier » 06 Feb 2019, 08:52

It should be easy to create with the add printer wizard.

Just finally add some GCode tweaks as you would in any other slicer. they depend on your setup ( Bed Leveling, addons stuff etc ) and could nbot be shared anyway.

I have a profile for an A8 with Bed Levelling and a priming sequence at a extreme left/front Position . I remember i ran that one on some guys Tevo flash with no issues.
so if you like to try, i can share
harrygeier
 
Posts: 16
Joined: 05 Jan 2019, 13:29

Re: Ender 3 need profile

Postby ismaelzsilva » 07 Feb 2019, 10:52

Cthutq wrote:Very popular printer Ender 3. I suggest to share the settings and printing problems of this printer. I would be grateful if the settings for this printer appear.


Hi! I started using Kisslicer yesterday, reading a lot of documents and actually had a good results. I am in classroom right now and just buildup a new profile. There is the print-screens of what i changed. Just be sure you shutdown your printer before printing with a new gcode file. It seems that the internal memory doenst change after printing once.

https://imgur.com/a/9ht7ABx

Have a nice day!
ismaelzsilva
 
Posts: 7
Joined: 07 Feb 2019, 07:32

Re: Ender 3 need profile

Postby Cthutq » 07 Feb 2019, 10:58

harrygeier, ismaelzsilva Thank you very much, I did the tests myself yesterday and I liked the results. And I downloaded all the screenshots of the settings for my experiments.
Cthutq
 
Posts: 28
Joined: 12 Jul 2018, 13:45

Re: Ender 3 need profile

Postby ismaelzsilva » 08 Feb 2019, 03:30

Cthutq wrote:harrygeier, ismaelzsilva Thank you very much, I did the tests myself yesterday and I liked the results. And I downloaded all the screenshots of the settings for my experiments.


Nice to know you will try it. I have a lot of problems with my bowden extruder so i printed a mod to transform the extruder in a direct one. In a direct extruder the retraction will be smaller than in a bowden type. When i finish polishing it i will upload some updated settings.

Have a nice weekend!
ismaelzsilva
 
Posts: 7
Joined: 07 Feb 2019, 07:32

Re: Ender 3 need profile

Postby Virag » 25 Apr 2019, 12:08

Hi, I couldn`t find or create settings for my Anet A8. I`d like to try Kisslicer but prints wont start,cand you help me with the settings please? Thank you!
Virag
 
Posts: 1
Joined: 25 Apr 2019, 12:04

Re: Ender 3 need profile

Postby pjr » 25 Apr 2019, 13:04

Virag wrote:Hi, I couldn`t find or create settings for my Anet A8. I`d like to try Kisslicer but prints wont start,cand you help me with the settings please? Thank you!


If you can upload some G-code (zipped) which will work, it should be quite simple to get KISS working.

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 563
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Ender 3 need profile

Postby marcus » 08 Jun 2019, 03:04

Hello :-)

Does anyone here find a good profile/settings for the Ender-3? I have mixed results.

Thank you!

-Marcus
marcus
 
Posts: 1
Joined: 08 Jun 2019, 03:02


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest