KISSlicer 1.6 Release is here! (UPDATED 2017-09-08)

Re: KISSlicer 1.6 Beta 4.3 is here! (UPDATED 2017-08-09)

Postby BoriSpider » 11 Aug 2017, 08:24

Yeah I'm still not sure what was going on there. Maybe it cause I homed first before the test, but don't think so.
I got the ooze, measured it, got the #'s I needed and moved on. Going to try the destring tuning wizard today.
BoriSpider
 
Posts: 32
Joined: 20 Jul 2017, 08:28

Re: KISSlicer 1.6 Beta 4.3 is here! (UPDATED 2017-08-09)

Postby lonesock » 15 Aug 2017, 12:55

walker wrote:Hi,
many thanks for new releases but is there the reason the linux version is not still available? I'd like to test it and help with bugs but I am using linux and the last version is beta2.4(and latest version is beta4.3)

Sorry for the lack of Linux builds, I was focusing on the machines my small circle of alpha testers use and just got lazy about building on all platforms. I'm almost ready for Release Candidate 1, and that one will be built for Linux as well.

Thank you for your patience,
Jonathan
User avatar
lonesock
 
Posts: 253
Joined: 09 Nov 2014, 18:41

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-17)

Postby lonesock » 17 Aug 2017, 20:48

Hi, everybody!

The Release Candidate it out!!! (Linux builds will have to be tomorrow, sorry!)

I would very much appreciate any testing you can do in the next week or so. I will be working on updating the website.

Here is the changelog:
Code: Select all
2017-08-17 - v1.6 Release Candidate 1.0
   * Finer delta extruder RPM for BfB/CubeX firmware.
   * Added 'Breakaway' text to 'Soluble' in Support Profile wizard.
   * Added brief instructions to PreloadVE Exp Wiz.
   * Made wizard windows have a minimum size.
   * Fixed a bug when forcing the defaults above current settings level.
   * Changed Delete-Profile to only report failure if file exists but could not be deleted.
   * Profile deleting can now handle non-ASCII filenames.
   * Allow a settings-level without a default value.
   * Updated settings level for all controls.

2017-08-16 - v1.6 Beta 5.4
   * Changed settings levels names to Basic Intermediate Advanced.
   * Updated settings assigned level, and default values.
   * Can handle default value on text inputs (for #/% fields).
   * Extruder map summary shows mapping on new line to preserve space.
   * Extruder config added numbers to labels so they can be translated.
   * make sure all text is translatable
   * Infill / loop overlap set to full on sparse-adapting-to-solid infill.
   * Unsupported thresholds varied, then returned to middle third.
   * Remove unsupported flag if a path only had a tiny low-value segment.
   * Adaptive layer thickness now decides whether to keep last division by
         seeing which average layer thickness is closer to the
         (min + max) / 2 layer thickness.
   * Added some hints to the tuning wizard.

2017-08-15 - v1.6 Beta 5.3
   * Unsupported paths now feather in from 33% (0 extra cooling) to 67% (full cooling).
   * The prepare for path change message is now generated 20mm before path end.

2017-08-14 - v1.6 Beta 5.2
   * Hopefully unsupported velocity and fan now works for BfB.
   * Approximated Preload using additional destring on BfB.
   * Blend fan speed to Cool as estimated layer time approached min layer time.
   * Blends fan as a function of "how_unsupported", and modulates during unsupported segments.
   * Blends speed down to cool flow rate as a function of "how_unsupported".
   * New XY Gap split into interface and main support.
   * XY Gaps now support % of Extruder Width.
   * Put in some preliminary work on the "Lock Paths" PRO function.
   * In Preload Exp Wiz, turn groups light red if critical values are <= 0.
   * Warn if the printer is not set for Preload when tuning wizard selects PreloadVE as mode.
   * Fixed some Tab Order issues.
   * Checking if printer can Preload in Tuning Wizard.
   * Cleaning up menus.
   * Working on flagging 0-values in Preload Exp Wiz.
   * Worked around the "Weird tiny segments near perimeter when using brim" bug.
   * Only slow top raft interface layer if it's a different extruder from the raft.
   * Raft interface layers now respect the first layer thickness limit.
   * Make interface-on-raft layer unsupported (to slow it down).
   * Only trigger actual dwell if at least 50% of the required min layer time remains.
   * Changed the Material Profile Wizard's PreloadVE values.

2017-08-08 - v1.6 Beta 5.0
   * "_restrict.ini" file in the KSPATH will be read in and set the Restrict Advanced Settings password

thanks,
Jonathan
User avatar
lonesock
 
Posts: 253
Joined: 09 Nov 2014, 18:41

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-17)

Postby EddyMI3D » 18 Aug 2017, 01:49

lonesock wrote:Hi, everybody!
...
Here is the changelog:
Code: Select all
2017-08-17 - v1.6 Release Candidate 1.0
...
   * Added brief instructions to PreloadVE Exp Wiz.
...

...
thanks,
Jonathan


Darn! just me have the K8200 :-)
But not for long - I'm about to order the i3 MK2s (original)

Eddy
User avatar
EddyMI3D
 
Posts: 70
Joined: 03 Oct 2015, 17:12

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-17)

Postby pjr » 18 Aug 2017, 03:15

EddyMI3D wrote:But not for long - I'm about to order the i3 MK2s (original)

Eddy


Now, that's a very good idea. And as a free bonus, it comes with reduced shipping times!

You should also consider the MMU...

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 225
Joined: 05 May 2015, 10:27
Location: Slovenia

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-17)

Postby EddyMI3D » 18 Aug 2017, 07:47

pjr wrote:...
You should also consider the MMU...

Peter

Hello Peter,

it's on my list too :D

Eddy
User avatar
EddyMI3D
 
Posts: 70
Joined: 03 Oct 2015, 17:12

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-17)

Postby hacker » 18 Aug 2017, 08:50

What's MMU?
hacker
 
Posts: 60
Joined: 20 Aug 2016, 18:25

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-17)

Postby pjr » 18 Aug 2017, 09:26

hacker wrote:What's MMU?


Multi Material upgrade. Two or four filament via single nozzle. http://shop.prusa3d.com/en/printer-upgr ... grade.html

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 225
Joined: 05 May 2015, 10:27
Location: Slovenia

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-17)

Postby hacker » 18 Aug 2017, 09:31

pjr wrote:
hacker wrote:What's MMU?


Multi Material upgrade. Two or four filament via single nozzle. http://shop.prusa3d.com/en/printer-upgr ... grade.html


Thanks. I thought "MM" is about multi material, but didn't come up with "U" :) And I also thought that original prusa comes multimaterial nowadays.
hacker
 
Posts: 60
Joined: 20 Aug 2016, 18:25

Re: KISSlicer 1.6 RC 1 is here! (UPDATED 2017-08-18)

Postby lonesock » 18 Aug 2017, 17:27

Linux builds are up!

Jonathan
User avatar
lonesock
 
Posts: 253
Joined: 09 Nov 2014, 18:41

PreviousNext

Return to Beta release talk

Who is online

Users browsing this forum: Bing [Bot] and 3 guests