Smart Travel Paths

Post Reply
morgandc
Posts: 1
Joined: 12 Sep 2018, 20:49

Smart Travel Paths

Post by morgandc »

First of all THANKS for the new version, I just resliced my STL with the KISSlicer_Win64_v2_alpha_0.4.4 version. While watching the path of the threaded hose connecter, for the most part Smart Travel Paths has made a HUGE difference in part stringing. As I watched the printing travel paths on OctoPrint most of the travel paths stayed in the solid section, but from time to time it would cut the corners through the opening and cause stringing. Just wanted to says thanks for the improvement, and give feedback on my experience.

-Dwight
Post Reply