Multipart Benchy

Discuss general topics that don't suit another sub-forum
Post Reply
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Multipart Benchy

Post by pjr »

I have been trying to print a multi-filament Benchy for some time now, the biggest issue I have had is that the model available here: https://www.thingiverse.com/thing:763622/#files 3d_Benchy_Multipart_Complete has quite a large amount of damage and will not print correctly.

I had tried all the usual fix programs but without success. When I tried makeprintable.com the end result was perfect but all the meshes had been combined - no use for multiple filament printing.

I then was contacted by Faisal at MakePrintable and we had a very good discussion about this issue. He provided me with a fixed file which contains 22 meshes, which are all good; he also advised that they would include a feature on their site to enable keeping the meshes separate.

So, for anyone interested, I have attached the fixed and now KISSliceable Benchy.

Peter
Attachments
Benchyfix.zip
(3.6 MiB) Downloaded 120 times
Post Reply