How to slice when inside and outside are same?
Posted: 14 Nov 2016, 14:12
Hi,
I'm trying to slice a "Klein Bagel" .STL file. But as the inside and the outside are continuously connected, the slicer is confused. How can I do that?
See: https://3dwarehouse.sketchup.com/model. ... f488f2666a for an example in SketchUp or Collada.
When generating a .STL file some of the face are flagged inside/outside wrong and the slicer show the model in red for a large part, but in this case I would like to ignore all of these and generate the .gcode.
A similar project is the doughnut: https://3dwarehouse.sketchup.com/model. ... f488f2666a
Has anyone tried something like this before?
Regards,
Wim.
I'm trying to slice a "Klein Bagel" .STL file. But as the inside and the outside are continuously connected, the slicer is confused. How can I do that?
See: https://3dwarehouse.sketchup.com/model. ... f488f2666a for an example in SketchUp or Collada.
When generating a .STL file some of the face are flagged inside/outside wrong and the slicer show the model in red for a large part, but in this case I would like to ignore all of these and generate the .gcode.
A similar project is the doughnut: https://3dwarehouse.sketchup.com/model. ... f488f2666a
Has anyone tried something like this before?
Regards,
Wim.