Cubeitmod 4.91 Print Errors

Post Reply
Jordanmackay
Posts: 1
Joined: 20 Nov 2016, 21:53

Cubeitmod 4.91 Print Errors

Post by Jordanmackay »

I have trying to get my cubex duo to print with kisslicer for a couple weeks now and can not figure out why i am getting the results that i am. I hav tried to print the "finetune" part file but it always screws up on the same wall no matter how i orientate it or no matter what setting i use. I am printing with 1.75mm abs so i know that could be causing some issues but i doubt thats why it wont print this side. i have the original hot end and a heated bed set to 110c. The entire printer is enclosed. also none of the fans turn on during any part of the print.They dont turn on with the cubex software or with kisslicer but i have seen the 2 print fans on when i was running the extruder to unclog it but that was the only time. any tips to make the fans work and to get a proper print would be much appreciated!
Attachments
IMG_20161120_200837337.jpg
IMG_20161120_200802033.jpg
IMG_20161120_200826950.jpg
User avatar
gastonfama
Posts: 45
Joined: 29 Sep 2015, 12:21

Re: Cubeitmod 4.91 Print Errors

Post by gastonfama »

I have never tryied with ABS, sorry cant help.

The missing part when starting the wall seams M227 / M228 problem.

Have you read this?

http://www.cubexupgrade.com/tipstricks/ ... primesuck/

Hope this helps...
rubixzcubex
Posts: 3
Joined: 10 Dec 2016, 10:35

Re: Cubeitmod 4.91 Print Errors

Post by rubixzcubex »

If you are still having trouble check out my YouTube Channel. https://www.youtube.com/channel/UCcit95 ... WflgfwsvTA I have videos from set up to detail explanations. If that dose not work email me in detail you problem because I want to solve your problem. rubixzcubex@gmail.com


RCX
Post Reply