new cubex duo suffer... user

new cubex duo suffer... user

Postby GVi » 04 Oct 2019, 12:09

hi all hope this is the correct place to post this... ive inherited a cubex due and after a month of headaches its still sat there looking pretty doing fa as far as i can tell i need kissliser (now dl'ed) and this mystical thing called "cubeitmod" i cant find the later anywhere ? could some provide a link plz?
all the links ive found are dead and/or no longer working!

any help appreciated
thanks
gordy
GVi
 
Posts: 12
Joined: 04 Oct 2019, 11:58

Re: new cubex duo suffer... user

Postby GVi » 04 Oct 2019, 13:03

ok so just sussed it was my isp stopping the dl i have know got it from this site thanks
GVi
 
Posts: 12
Joined: 04 Oct 2019, 11:58

Re: new cubex duo suffer... user

Postby GVi » 04 Oct 2019, 13:29

Ok so getting closer... what dose this mean ?

"Cubeitmod605.exe "filename" failed returning 1?
GVi
 
Posts: 12
Joined: 04 Oct 2019, 11:58

Re: new cubex duo suffer... user

Postby pjr » 05 Oct 2019, 03:41

To run CubitMod, I believe that you will have to be running KISS V1.5 (although 1.6 may be OK) as this program relies on KISS comments to operate.

As for the Post Process command, please try formatting as follows:

""Cubeitmod.exe" "<FILE>""

Note that both program and file have double-quotes, as does the whole string - 3 pairs in total.

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 598
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: new cubex duo suffer... user

Postby GVi » 06 Oct 2019, 06:52

thanks peter sorted that issue but now i get a "cubitmod fetal error speed selection warning" any ideas?
GVi
 
Posts: 12
Joined: 04 Oct 2019, 11:58

Re: new cubex duo suffer... user

Postby pjr » 06 Oct 2019, 14:07

Sorry, I have never used CubeitMod, so I don't know what the errors relate to.

Maybe someone else will be able to help.

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 598
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: new cubex duo suffer... user

Postby GVi » 06 Oct 2019, 15:49

Are you running it on the 3d systems software? If so whats the cost ?
GVi
 
Posts: 12
Joined: 04 Oct 2019, 11:58

Re: new cubex duo suffer... user

Postby GVi » 06 Oct 2019, 15:50

Im honestly at my wits end with this might sell it and get a plug and play one
GVi
 
Posts: 12
Joined: 04 Oct 2019, 11:58

Re: new cubex duo suffer... user

Postby pjr » 07 Oct 2019, 02:38

GVi wrote:Are you running it on the 3d systems software? If so whats the cost ?


No. Prusa "originals" Mk2+MMU and Mk3+MMU2

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 598
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: new cubex duo suffer... user

Postby GVi » 08 Oct 2019, 05:28

Ok thx again ill look into that ... last comment made out of frustration ive been at this for weeks lol
GVi
 
Posts: 12
Joined: 04 Oct 2019, 11:58

Next

Return to 3D Systems: Cubex, Cubepro etc.

Who is online

Users browsing this forum: No registered users and 2 guests