The Good, The Bad and The Ugly

Post Reply
magicmodel
Posts: 1
Joined: 19 Mar 2015, 14:01

The Good, The Bad and The Ugly

Post by magicmodel »

Just wanted to upload my test print for the cone Johnathan uploaded in the old forum
https://groups.google.com/forum/#!topic ... %5B1-25%5D
This was made using the new wall feature which traps the oozing material. Works quite well. Big shout out to David Wundel for the GCode extruder change script. Cheers Dave.
Image
The Good

Image
The Bad

Image
The Ugly
Post Reply