Multi color honeycomb fill rocket fins

Post Reply
Fablicator
Posts: 14
Joined: 13 Nov 2014, 13:39

Multi color honeycomb fill rocket fins

Post by Fablicator »

Blue PLA honeycombs encased inside of a clear PLA superstructure.
IMG_20150114_084850914.jpg
The part is a fin for a rocket.
Ros
Posts: 42
Joined: 06 Dec 2014, 10:50
Location: Sabadell, Catalunya

Re: Multi color honeycomb fill rocket fins

Post by Ros »

NICE!!
User avatar
Davide Ardizzoia
Posts: 122
Joined: 07 Nov 2014, 13:05
Location: Oleggio, Italy
Contact:

Re: Multi color honeycomb fill rocket fins

Post by Davide Ardizzoia »

now, HOW did you get that with Kisslicer ?!?


Best Regards
Davide Ardizzoia
Isaac_alaska
Posts: 48
Joined: 17 Nov 2014, 03:51

Re: Multi color honeycomb fill rocket fins

Post by Isaac_alaska »

one way with a single extruder is to set the infil to about 20%, start with clear, as soon as the first skin is printed, switch to blue, as soon as the honecomb infil finishes, switch back to clear.
Fablicator
Posts: 14
Joined: 13 Nov 2014, 13:39

Re: Multi color honeycomb fill rocket fins

Post by Fablicator »

Multi extruder is the only practical way...
User avatar
Davide Ardizzoia
Posts: 122
Joined: 07 Nov 2014, 13:05
Location: Oleggio, Italy
Contact:

Re: Multi color honeycomb fill rocket fins

Post by Davide Ardizzoia »

Trouble is: I don't know how Kisslicer can do an hex infill.

Brgds
Davide Ardizzoia
Post Reply