SuperFly and some other prints...

Post Reply
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

SuperFly and some other prints...

Post by pjr »

IMG_20171027_094641.jpg
https://www.thingiverse.com/thing:2564723 (200%)

4C Red, Yellow, White (eyes) and Transparent (wings)

Purge: 30, 50, 50, 60; Slight bleed on the white - should have purged 60mm.

0.2mm layers with support (now removed)

14h 51m

Peter
User avatar
lonesock
Posts: 258
Joined: 09 Nov 2014, 18:41
Contact:

Re: SuperFly

Post by lonesock »

Very nice! (I'm glad you mentioned the materials...for some reason from the pic I was thinking the eyes and wings used the same material and the color variation was due to the light.) 15 hours! Time sure flies...(sorry!)

Jonathan
inventabuild
Posts: 271
Joined: 09 Nov 2014, 23:03

Re: SuperFly

Post by inventabuild »

Nice!
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Om Nom and a turtle

Post by pjr »

IMG_20171031_093836.jpg
Variable layer height, both printed together ("Joint") and a little more purging on the lighter colours.

And thanks again to Roman for the models!

Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Racing frogs

Post by pjr »

IMG_20171031_170955.jpg
0.2mm layers, 5h 13m

Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Articulated Fish.

Post by pjr »

I was reminded of this print by another forum user. It had been a while (11 months) since I printed this as a 2C model and part of the PR MMU Beta test programme.
IMG_20171107_123419.jpg
This model however was printed with variable layer heights, multiple models and sizes and 4C. Print time 11h 42m.

Peter
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Useless Piggy Bank

Post by pjr »

Decided to try this print for my kids: https://www.thingiverse.com/thing:437576

It looked a little small, so I increased the size to 150%
IMG_20171109_140321.jpg
Now all the money can fall out... :cry:

Peter
Post Reply