Page 1 of 1

Chequered Octopus

Posted: 13 Oct 2017, 13:21
by pjr
IMG_20171013_201839.jpg

Re: Chequered Octopus

Posted: 13 Oct 2017, 15:23
by EddyMI3D
Peter - this one is awesome!

Re: Chequered Octopus

Posted: 13 Oct 2017, 15:53
by mhackney
Super Duper Peter!

Re: Chequered Octopus

Posted: 13 Oct 2017, 16:02
by pjr
Thanks guys. 8 hours at 0.2mm layers; I also printed the original (https://www.thingiverse.com/thing:244927) with variable layers (0.8 to 0.2) in 2 colours: 14 hours.
IMG_20171011_113037.jpg
The wipe towers are bigger than necessary; I just allowed a regular 50mm purge per filament and on the 4C model, there were 3 layers which came out at 2 changes due to filament ordering.

Peter