KISS 1.6 Beta 3.10

KISS 1.6 Beta 3.10

Postby pjr » 03 Aug 2017, 16:37

4 colour variable layer height, variable purge standing on the purge tower:

IMG_20170803_230505.jpg


Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 230
Joined: 05 May 2015, 10:27
Location: Slovenia

Re: KISS 1.6 Beta 3.10

Postby EddyMI3D » 04 Aug 2017, 01:59

Looks great, Peter!
Which hotends do you use?

Eddy
User avatar
EddyMI3D
 
Posts: 71
Joined: 03 Oct 2015, 17:12

Re: KISS 1.6 Beta 3.10

Postby pjr » 04 Aug 2017, 04:24

EddyMI3D wrote:Looks great, Peter!
Which hotends do you use?

Eddy



Just one (SNMM), hence the relatively huge purge tower. E3D V6. But with modified heat break and special PTFE liner (1.9mm ID).

Biggest issue is that with 0.1mm layers, you still have to purge the same amount of filament on each change as 0.3mm layers.

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 230
Joined: 05 May 2015, 10:27
Location: Slovenia

Re: KISS 1.6 Beta 3.10

Postby Olivier13 » 05 Aug 2017, 17:26

Wow !
The result is very amazing.
Is it a "make it sure" purge tower or have you calculated/designed it before the print?
Printer : A4v3 From 3ntr - 2 Extruders.
http://www.additec.fr
User avatar
Olivier13
 
Posts: 42
Joined: 29 Jun 2015, 10:46

Re: KISS 1.6 Beta 3.10

Postby pjr » 06 Aug 2017, 02:37

Olivier13 wrote:Wow !
The result is very amazing.
Is it a "make it sure" purge tower or have you calculated/designed it before the print?


With SNMM you have to purge a lot of material. With all post-processors (and Slic3r PE) until now, you basically entered the tower size and it created a simple purge tower with all filaments having an equal purge area.

Of course, opaque filaments require less purging than translucent/transparent ones, so I wrote a post-processor which does exactly that. The purge amount can be determined either by extruder or filament name. Now I purge 30mm for opaque filaments, 60mm for translucent, 80 for transparent etc.

The result is a smaller tower and less overall filament waste. :D

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 230
Joined: 05 May 2015, 10:27
Location: Slovenia

Re: KISS 1.6 Beta 3.10

Postby JAT.MN » 23 Sep 2017, 19:50

I been playing with KISS 1.6 (Release)
How did you make this purge block?? Im running a Rostock Max v3 with Y Adapter.
I have not figured out how to inflate the size of the purge pillars (which are hollow) to purge more filament to get a better color transition...
JAT.MN
 
Posts: 2
Joined: 23 Sep 2017, 19:41

Re: KISS 1.6 Beta 3.10

Postby pjr » 24 Sep 2017, 03:01

viewtopic.php?f=27&t=1988

It should now work with most SNMM systems.

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 230
Joined: 05 May 2015, 10:27
Location: Slovenia

Re: KISS 1.6 Beta 3.10

Postby JAT.MN » 24 Sep 2017, 14:20

It does not like round beds I think.. see screenshot.. I had tried this before posting :(
Attachments
PrusaPP_2017-09-24_12-19-40.png
PrusaPP_2017-09-24_12-19-40.png (23.58 KiB) Viewed 240 times
JAT.MN
 
Posts: 2
Joined: 23 Sep 2017, 19:41

Re: KISS 1.6 Beta 3.10

Postby pjr » 24 Sep 2017, 14:32

JAT.MN wrote:It does not like round beds I think.. see screenshot.. I had tried this before posting :(


Shouldn't be too difficult to fix. Will have a look. The only issue may be the physical size so it may need to be scaled a little.

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 230
Joined: 05 May 2015, 10:27
Location: Slovenia

Re: KISS 1.6 Beta 3.10

Postby pjr » 25 Sep 2017, 15:27

JAT.MN wrote:It does not like round beds I think.. see screenshot.. I had tried this before posting :(


Any chance you could upload a project file? That would help a lot with the program amendment.

TIA

Peter
Please note: I do not have any affiliation with KISSlicer. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss.
User avatar
pjr
 
Posts: 230
Joined: 05 May 2015, 10:27
Location: Slovenia


Return to Gallery

Who is online

Users browsing this forum: No registered users and 1 guest