- IMG_20191212_094450.jpg (3.23 MiB) Viewed 576 times
25 hour print in 4 sections, layer height of 0.15mm.
108,446 total retracts (average 1.2 per second) of 3.2mm during the print.
Peter
Prusa Mini
-
pjr
- Posts: 659
- Joined: 05 May 2015, 10:27
- Location: Kamnik, Slovenia
Prusa Mini
Eiffel Tower: https://www.thingiverse.com/thing:268757
25 hour print in 4 sections, layer height of 0.15mm.
108,446 total retracts (average 1.2 per second) of 3.2mm during the print.
Peter
25 hour print in 4 sections, layer height of 0.15mm.
108,446 total retracts (average 1.2 per second) of 3.2mm during the print.
Peter
-
drracer
- Posts: 8
- Joined: 23 Apr 2016, 11:45
- Contact:
Re: Prusa Mini
Well done 
.
Would you mind sharing the profile for the MINI? Thank you
. Would you mind sharing the profile for the MINI? Thank you
-
Marvin27
- Posts: 1
- Joined: 31 Dec 2020, 12:40
Re: Prusa Mini
Great print. 
I would also like to ask about the possibility of sharing profiles for MINI.
I would also like to ask about the possibility of sharing profiles for MINI.