Skirt was not printed first

Locked
dinow
Posts: 1
Joined: 29 Sep 2017, 20:24

Skirt was not printed first

Post by dinow »

Hi,

I use kisslice v1.6.3 to slice this model. https://www.thingiverse.com/thing:331035
The skirt was not printed first.
Attachments
Robot_Maker_Faire_65pc.zip
(4.36 MiB) Downloaded 70 times
Mysteur yo
Posts: 1
Joined: 06 Mar 2019, 09:46

Re: Skirt was not printed first

Post by Mysteur yo »

Hi dinow

I have the same issue than you, the skirt is not print first

I have contorted this problem by activate the prime pillar on the 1st layer for purged the hotend

I hope that this misteak with the skirt as reasolved in the future realese

regards
Locked