First Layer Thickness ignored

Locked
Googliola
Posts: 3
Joined: 27 Dec 2017, 17:52

First Layer Thickness ignored

Post by Googliola »

V1.6.2 Win64
No matter if variable or fixed layer height is used:
Attachments
Kisslicer_1stLayerHeightBug_varHeight.png
Kisslicer_1stLayerHeightBug_varHeight.png (68.68 KiB) Viewed 1298 times
Kisslicer_1stLayerHeightBug_fixedHeight.png
Kisslicer_1stLayerHeightBug_fixedHeight.png (78.97 KiB) Viewed 1298 times
User avatar
plm
Posts: 6
Joined: 31 Dec 2017, 03:56
Location: Moscow Russia

Re: First Layer Thickness ignored

Post by plm »

What is set in Printer - Hardware - Z Step [mm]?
Googliola
Posts: 3
Joined: 27 Dec 2017, 17:52

Re: First Layer Thickness ignored

Post by Googliola »

Z step is set to 0
(sorry for late response, forgot that notify-me-tick)

Set it to 0.05 and that indeed changed the 1st layer. Unfortunately, first layer height is overriden depending on values of Layer Thickness / Max (and model geometry if these values are not equal). As a user I expect the first layer to be whatever I defined in 1st - regardless of thickness, max, z step or geometry. Everything else is confusing and removal of the property should be considered.
Locked