Strange first layer path.

Locked
vibez
Posts: 16
Joined: 02 Sep 2017, 12:09

Strange first layer path.

Post by vibez »

For some reason kiss seems to print every other layer as shown on the attached in yellow, it then goes back and fills in those gaps, leaving a rough 1st layer
Capture.PNG
Capture.PNG (32.55 KiB) Viewed 1269 times
vibez
Posts: 16
Joined: 02 Sep 2017, 12:09

Re: Strange first layer path.

Post by vibez »

Seems it's the seam angle causing this issue. If I have it set at 6 or 12 o'clock I get this issue but at 3 or 9 o'clock it's fine
Locked