Grid do not take in account the brim diameter

Locked
User avatar
Olivier13
Posts: 45
Joined: 29 Jun 2015, 10:46
Contact:

Grid do not take in account the brim diameter

Post by Olivier13 »

Hi

In KS 1.5 RealeseIf you use grid + (large) brim option with multiple objects/Island, islands grids cross themselves : the grid do not take in account the brim diameter.
To avoid : use "Inflate Raft..." option to correct...but you will see your prime pillar growing as well :(
Regards

...is there anybody (Jonathan) out there?
Printer : A4v3 From 3ntr - 2 Extruders.
http://www.additec.fr
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: Grid do not take in account the brim diameter

Post by pjr »

Hi

I have just checked the latest alpha and it does not appear to be an issue in that.

I loaded 2 models, set brim to 10mm and inflate raft to 3mm. After slicing the raft looks just a little more than 3mm outside the brim.

You may want to check it out when the next beta arrives.

Peter
Locked