Page 1 of 1

Note STL files used in GCODE comment

Posted: 11 Jul 2018, 04:03
by jsryork
Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John

Re: Note STL files used in GCODE comment

Posted: 11 Jul 2018, 06:05
by pjr
Added to the V2 "Feature Request List"

Peter

Re: Note STL files used in GCODE comment

Posted: 12 Feb 2019, 14:15
by whaling
jsryork wrote:Hi
I have been 3D printing for a couple of years, I love Kisslicer and use it all the time.
I tend to many variations of models with different STL file names, but I loose track of which I have with different print settings. It would be very useful to be able to see from a GCODE file which STL files were used, and the count/orientation for each model.
Thanks
John
I second this, and would also find a record of the transformations applied to the model (eg scaling) really useful.

Re: Note STL files used in GCODE comment

Posted: 17 May 2019, 02:23
by ruffle
Thirded :)

It would also be useful if it stored the full filepathname and could automatically try to load it again.