Speed slider and readout reflect flow adjust min/max

Post Reply
rob
Posts: 2
Joined: 08 Sep 2016, 10:34

Speed slider and readout reflect flow adjust min/max

Post by rob »

In the lower right panel the current speed for Perim/Loops/etc is displayed and reflects the speed range setting for the printer tab and the slider position in style tab.
The material tab has a Flow Adjust panel with Min and Max settings, and the tooltips indicate that the print speed will be adjusted to stay within these limits as necessary.
I have recently learned about calibrating my filament by maximum flow rate, which has been very useful for understanding why I can't print faster with some filaments.

It would be cool if the speed readout in the lower right panel would reflect these limits. It seems like this would also make the slider range in the Style tab more useful -- such that the full slow/fast slider range with e.g. ninjaflex material (I have read won't work over 30mm/sec) would be also valid with ABS material (I can get up to 150mm/sec).

Thanks for considering!
Post Reply