The Tip Is Not Printed

The Tip Is Not Printed

Postby deepwhite » 01 Oct 2019, 16:51

hi there,

i designed a "baby unicorn" model early on, and was trying to print it with kisslicer today, only to find that the tip of the horn (corn?) is left out after the slicing. please find the screenshot in the attachment.

people told me that it was because the tip was smaller than the printing head (0.4mm), and there is no way around it with kisslicer, but to use other slicing softwares. yet i don't want to give up. please be so kind as to help me out here with this issue, thanks.

best regards,

arys chien
deepwhite studio
Attachments
Screen Shot 2019-10-01 at 9.50.51 PM.png
Screen Shot 2019-10-01 at 9.50.51 PM.png (86.07 KiB) Viewed 216 times
deepwhite
 
Posts: 3
Joined: 01 Oct 2019, 16:47

Re: The Tip Is Not Printed

Postby ksh_germany » 02 Oct 2019, 09:13

Hi, have you tired to Set the oversample Resolution small er? (pro/Premium Feature) when you share the stl i can Try to find a solution.
Greetings from Germany

Beantworte fragen zu Kisslicer auf deutsch ;)
User avatar
ksh_germany
 
Posts: 7
Joined: 11 May 2019, 04:56
Location: Siegen, NRW, Germany

Re: The Tip Is Not Printed

Postby deepwhite » 02 Oct 2019, 09:19

ksh_germany wrote:Hi, have you tired to Set the oversample Resolution small er? (pro/Premium Feature) when you share the stl i can Try to find a solution.

thanks for the tip. i'll give it a try. kisslicer is a great software and worth paying for a pro version.

the stl file is here: https://www.myminifactory.com/object/3d ... hite-86239
deepwhite
 
Posts: 3
Joined: 01 Oct 2019, 16:47

Re: The Tip Is Not Printed

Postby ksh_germany » 02 Oct 2019, 10:52

So i tested, the only way i found is to layer that small unicorn on side. So horn will be printed.
i testet a slice with a 0.2 nozzle even there the tip wan't to be printed. Scaling changes nothing!
Last edited by ksh_germany on 03 Oct 2019, 02:40, edited 1 time in total.
Greetings from Germany

Beantworte fragen zu Kisslicer auf deutsch ;)
User avatar
ksh_germany
 
Posts: 7
Joined: 11 May 2019, 04:56
Location: Siegen, NRW, Germany

Re: The Tip Is Not Printed

Postby deepwhite » 02 Oct 2019, 20:35

ksh_germany wrote:Hi, have you tired to Set the oversample Resolution small er? (pro/Premium Feature) when you share the stl i can Try to find a solution.

tried it. "oversample resolution" doesn't help, even when set to very small value (like 0.02mm) :|
deepwhite
 
Posts: 3
Joined: 01 Oct 2019, 16:47

Re: The Tip Is Not Printed

Postby ksh_germany » 03 Oct 2019, 02:42

Yes yes you have to put IT on the side so tip will printed.
Or you put an 0.1 nozzle in your hotend.
Greetings from Germany

Beantworte fragen zu Kisslicer auf deutsch ;)
User avatar
ksh_germany
 
Posts: 7
Joined: 11 May 2019, 04:56
Location: Siegen, NRW, Germany


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 2 guests