over extrusion on initial print

Post Reply
steve.merchant
Posts: 1
Joined: 24 Aug 2020, 10:12

over extrusion on initial print

Post by steve.merchant » 05 Nov 2020, 13:35

New to KisSlicer. I have went through all the wizards in setting up KisSlicer but when I try to print gcode from KisSlicer my extruder wants to greatly over extrude. tried everything I know but cant figure out how to stop the problem. Printer is Hypercube Evolution with Duet2Wifi controller and Bond-tech BMG direct drive extruder.

Post Reply