drvlen with direct extruder

Post Reply
leleastro
Posts: 8
Joined: 20 Aug 2017, 13:01

drvlen with direct extruder

Post by leleastro »

Hi all,
should I set the drvlen parameter for titan extruder in direct mode or it's not necessary?
User avatar
pjr
Posts: 692
Joined: 05 May 2015, 10:27
Location: Kamnik, Slovenia

Re: drvlen with direct extruder

Post by pjr »

DrvLen is the distance between the drive gears and the tip of the nozzle, so I guess in your case it would be around 50mm.

Peter
Post Reply